Relay not starting plasma

[28arodma]

Built a plasma table and cannot get the plasma to fire up through the controller. Can start by shorting connections but not when connected to controller. Any suggestions things to look at to see if relay is working properly or not?

Everything else works fine. Is there anything to check with pins and ports etc?

28arodma.

Similar Threads:

• using a relay to activate a plasma torch (mach3)
• Need Help!- Relay for triggering plasma arc
• Problem- BOB to Solid State Relay Plasma CNC wiring
• Need Help!- AC Relay for Router Starting
• plasma relay problems

[28arodma]

Got my plasma table going and it works really well. Here is a short video.



28arodma.